Changing The Input Patch Settings - Yamaha CL5 Reference Manual

The CH SELECT popup window will appear. This popup window includes the following items.
1
1
Category select list
Selects the category of channel shown in the popup window. The categories correspond to the
following channels. They vary depending on the output port type.
• MIX/MATRIX.................................. MIX 1–MIX 24, MATRIX 1–MATRIX 8
• ST/MONO/MONI/CUE ................. STEREO L, STEREO R, MONO(C), MONI L, MONI R,
MONI C, CUE L, CUE R
• DIRECT OUT 1–32......................... CH1–CH32 Direct Outs
• DIRRECT OUT 33–64.................... CH33–CH64 Direct Outs
• DIRECT OUT 65–72 ...................... CH65–CH72 Direct Outs
• INSERT OUT 1–32.......................... CH1–CH32 Insert-outs
• INSERT OUT 33–64 ....................... CH33–CH64 Insert-outs
• INSERT OUT 65–72 ....................... CH65–CH72 Insert-outs
• INSERT OUT MIX/MATRIX ....... Insert-outs for MIX1-MIX24, MATRIX 1-MATRIX8
• INSERT OUT ST/MONO .............. Insert-outs for STEREO L, STEREO R, and MONO (C)
• CASCADE MIX/MATRIX............. MIX1–MIX24, MATRIX1–MATRIX8
• CASCADE ST/MONO/CUE.......... STEREO L, STEREO R, MONO(C), CUE L, CUE R
NOTE
In the case of the CL3/CL1, channels that do not exist on those models will not be shown.
2
Channel select buttons
Select the channel to be assigned to the output port you selected in step 3.
5.
Use the channel select tabs and the channel select buttons to select the source
channel, and press the CLOSE button.
You will return to the OUTPORT SETUP popup window.
NOTE
If PATCH CONFIRMATION is ON, a confirmation dialog box will appear when you attempt to
change the patch settings. If STEAL PATCH CONFIRMATION is ON, a confirmation dialog box
will appear when you attempt to change a location that is already patched elsewhere.
6.
Make settings for delay, phase, and output gain as necessary.
7.
Repeat steps 3–6 to assign channels to other output ports.
2
8.
When you have finished making settings, click the "x" symbol in the upper right of
the window to return to the previous screen.

Changing the input patch settings

This section explains how to change the patching of each input channel.
1.
Use the Bank Select keys in the Centralogic section to access the OVERVIEW screen
for the input channel to which you want to assign the input source.
2.
In the top part of the screen, press the channel number/channel name field to
access the PATCH/NAME popup window.
19
Input and output patching
Reference Manual