Output Channels; Signal Flow For Output Channels - Yamaha CL5 Reference Manual

Output channels

This chapter explains output channels (MIX channels, MATRIX channels, STEREO channels, MONO
channels).

Signal flow for output channels

The output channel section takes the signals sent from the input channels to the various buses,
processes them with EQ and dynamics, and sends them to output ports or other buses. The following
types of output channels are provided.
MIX channels
These channels process signals sent from input channels to MIX buses, and output them to the
corresponding output port, MATRIX bus, STEREO bus, or MONO (C) bus.
M
O
N
ST
MIX MATRIX CUE
O
1 2 2324 L R (C) 1 2 7 8 L R
MIX 1-24
INSERT POINT
To RACKIN PATCH POST ON
To OUTPUT PATCH MIX PRE FADER INSERT OUT
INSERT OUT 1-24 PRE EQ
MIX
INSERT IN 1-24
PRE EQ
METER
INSERT
ATT
PRE EQ
PRE EQ
INSERT OUT
CUE ON
MATRIX1,3...7 LEVEL ON
MATRIX2,4...8 LEVEL ON
LEVEL ON
PAN/BAL
ST L
MONO(C)
ST R
INSERT OUT
INSERT OUT
EQ OUT
DYNA OUT PRE FADER POST ON
METER METER METER
METER
GR METER BAL
LEVEL
ON
COMP
4BAND INSERT INSERT
MIX OUT1-24
COMPAND
EQ
EXPAND
PRE FADER
POST EQ PRE FADER POST ON
INSERT OUT
Keyin POST ON
Self PRE EQ/Self POST EQ/MIX21-24 OUT/ INSERT OUT
MIX(1-8,9-16,17-24) POST EQ
(PRE FADER)PFL / (POST ON)AFL
To MATRIX
PRE FADER / POST ON
VARI
To MATRIX
PRE FADER / POST ON
VARI
STEREO
PAN/BAL
PAN MODE TO ST TO MONO
LR MONO
TO LCR LCR
POST ON
CSR
STEREO channel/MONO (C) channel
Each of these channels processes the signal sent from the input channels to the STEREO bus or MONO
(C) bus, and send it to the corresponding output port or MATRIX bus. If input channels are in LCR
mode, the STEREO (L/R) channels and the MONO (C) channel can be used together as a set of three
output channels.
M
O
N
ST
MIX MATRIX CUE
O
1 2 2324 L R (C) 1 2 7 8 L R
STEREO L,R,MONO(C)
To RACKIN PATCH
To OUTPUT PATCH
INSERT OUT L,R,MONO(C)
INSERT IN L,R,MONO(C)
MATRIX1,3...7
MATRIX2,4...8
MATRIX channel
These channels process the signals sent from input channels, MIX channels, and STEREO/MONO
(21-24)To KEYIN
To RACKIN PATCH
channels to MATRIX buses, and send them to the corresponding output ports.
To OUTPUT PATCH
To MONITOR SELECT
M
O
N
ST
MIX MATRIX CUE
O
(C)
1 2 2324 L R 1 2 7 8 L R
MATRIX 1-8
To RACKIN PATCH
To OUTPUT PATCH
INSERT OUT 1-8
• 4 BAND EQ (4 band equalizer)
A parametric EQ with four bands: HIGH, HIGH MID, LOW MID, and LOW.
• DYNAMICS 1
This is a dynamics processor that can be used as a compressor, expander, or compander.
• LEVEL
Adjusts the output level of the channel.
• ON (on/off)
Turns the output channel on or off. If this is off, the corresponding channel will be muted.
46
INSERT POINT
POST ON INSERT OUT
PRE FADER INSERT OUT
STEREO
PRE EQ INSERT OUT
STEREO
PRE EQ EQ OUT
DYNA OUT PRE FADER
METER METER METER METER
GR METER
LEVEL
BAL
COMP
INSERT 4BAND INSERT
ATT COMPAND
EQ
EXPAND
PRE FADER
PRE EQ POST EQ PRE FADER
INSERT OUT
Keyin
PRE EQ
Self PRE EQ/Self POST EQ/MIX21-24 OUT/
INSERT OUT
ST(L,R,MONO(C)) POST EQ
CUE ON
(PRE FADER)PFL / (POST ON)AFL
LEVEL ON
To MATRIX
PRE FADER / POST ON
LEVEL ON VARI
To MATRIX
LEVEL ON
PRE FADER / POST ON
VARI
PAN/BAL
STEREO
INSERT POINT
POST ON INSERT OUT
PRE FADER INSERT OUT
MATRIX
PRE EQ INSERT OUT
MATRIX
INSERT IN 1-8
PRE EQ EQ OUT DYNA OUT PRE FADER
METER METER METER METER
GR METER
LEVEL BAL
COMP
INSERT 4BAND INSERT
ATT COMPAND
EQ
EXPAND
PRE FADER
PRE EQ POST EQ PRE FADER
INSERT OUT
Keyin
PRE EQ
Self PRE EQ/Self POST EQ/MIX21-24 OUT/
INSERT OUT
MATRIX1-8 POST EQ
CUE ON
(PRE FADER)PFL / (POST ON)AFL
Output channels
POST ON
METER
STEREO OUT
ON
L,R,MONO(C)
INSERT
To OUTPUT PATCH
To MONITOR SELECT
POST ON
POST ON
INSERT OUT
POST ON
METER
ON
MATRIX OUT 1-8
INSERT
To OUTPUT PATCH
To MONITOR SELECT
POST ON
POST ON
INSERT OUT
Reference Manual