Preparation; Mixer Network Settings; Wi-Fi Settings On Your Smart Device - Yamaha MonitorMix User Manual

Mixer network settings

1.
Use a CAT5 cable to connect the mixer network port and the Wi-Fi access point.
Older access points that do not support AUTO-MDI/MDI-X require that you connect the console using a crossover cable. For access points
that support AUTO-MDI/MDI-X (most do today), you can use either a straight cable or a crossover cable.
2.
Check that an Ethernet cable connects to the LAN port of your Wi-Fi device.
(Do not connect the Ethernet cable to the WAN port)

Wi-Fi settings on your smart device

Configure settings on your smart device using DHCP or a static IP address.
1.
Tap the [Settings] icon on the Home screen.
2.
Select [Wi-Fi].
MonitorMix User Guide

Preparation

5