Yamaha CL5 Reference Manual page 219

■ MOD.DELAY
One input, two output basic repeat delay with modulation.
Parameter Range
DELAY 0.0–2725.0 ms Delay time
Feedback gain (plus values for normal-phase feedback, minus values for
FB. GAIN –99 to +99%
reverse-phase feedback)
HI. RATIO 0.1–1.0 High-frequency feedback ratio
FREQ. 0.05–40.00 Hz Modulation speed
DEPTH 0–100% Modulation depth
WAVE Sine/Tri Modulation waveform
HPF THRU, 21.2 Hz–8.00 kHz High-pass filter cutoff frequency
LPF 50.0 Hz–16.0 kHz, THRU Low-pass filter cutoff frequency
SYNC OFF/ON Tempo parameter sync on/off
*1
DLY.NOTE Used in conjunction with TEMPO to determine DELAY
*2
MOD.NOTE Used in conjunction with TEMPO to determine FREQ
*1.
*2.
■ DELAY LCR
One input, two output 3-tap delay (left, center, right).
Parameter Range
DELAY L 0.0–2730.0 ms Left channel delay time
DELAY C 0.0–2730.0 ms Center channel delay time
DELAY R 0.0–2730.0 ms Right channel delay time
FB. DLY 0.0–2730.0 ms Feedback delay time
LEVEL L –100 to +100% Left channel delay level
LEVEL C –100 to +100% Center channel delay level
LEVEL R –100 to +100% Right channel delay level
Feedback gain (plus values for normal-phase feedback, minus values for
FB. GAIN –99 to +99%
reverse-phase feedback)
HI. RATIO 0.1–1.0 High-frequency feedback ratio
HPF THRU, 21.2 Hz–8.00 kHz High-pass filter cutoff frequency
LPF 50.0 Hz–16.0 kHz, THRU Low-pass filter cutoff frequency
SYNC OFF/ON Tempo parameter sync on/off
*1
NOTE L Used in conjunction with TEMPO to determine DELAY L
NOTE C *1 Used in conjunction with TEMPO to determine DELAY C
NOTE R Used in conjunction with TEMPO to determine DELAY R
*1
NOTE FB *1 Used in conjunction with TEMPO to determine FB. DLY
*1.
Description
(Maximum value depends on the tempo setting)
Description
(Maximum value depends on the tempo setting)
219
■ ECHO
Two input, two output stereo delay with crossed feedback loop.
Parameter Range
DELAY L 0.0–1350.0 ms Left channel delay time
DELAY R 0.0–1350.0 ms Right channel delay time
FB.DLY L 0.0–1350.0 ms Left channel feedback delay time
FB.DLY R 0.0–1350.0 ms Right channel feedback delay time
Left channel feedback gain (plus values for normal-phase feedback, minus
FB. G L –99 to +99%
values for reverse-phase feedback)
Right channel feedback gain (plus values for normal-phase feedback,
FB. G R –99 to +99%
minus values for reverse-phase feedback)
Left to right channel feedback gain (plus values for normal-phase feedback,
LR FBG –99 to +99%
minus values for reverse-phase feedback)
Right to left channel feedback gain (plus values for normal-phase feedback,
RL FBG –99 to +99%
minus values for reverse-phase feedback)
HI. RATIO 0.1–1.0 High-frequency feedback ratio
HPF THRU, 21.2 Hz–8.00 kHz High-pass filter cutoff frequency
LPF 50.0 Hz–16.0 kHz, THRU Low-pass filter cutoff frequency
SYNC OFF/ON Tempo parameter sync on/off
*1
NOTE L Used in conjunction with TEMPO to determine DELAY L
NOTE R *1 Used in conjunction with TEMPO to determine DELAY R
NOTE FBL Used in conjunction with TEMPO to determine FB. D L
*1
NOTE FBR *1 Used in conjunction with TEMPO to determine FB. D R
*1.
■ CHORUS
Two input, two output chorus effect.
Parameter Range
FREQ. 0.05–40.00 Hz Modulation speed
AM DEPTH 0–100% Amplitude modulation depth
PM DEPTH 0–100% Pitch modulation depth
MOD. DLY 0.0–500.0 ms Modulation delay time
WAVE Sine, Tri Modulation waveform
SYNC OFF/ON Tempo parameter sync on/off
*1
NOTE Used in conjunction with TEMPO to determine FREQ.
LSH F 21.2 Hz–8.00 kHz Low shelving filter frequency
LSH G –12.0 to +12.0 dB Low shelving filter gain
EQ F 100 Hz–8.00 kHz EQ (peaking type) frequency
EQ G –12.0 to +12.0 dB EQ (peaking type) gain
EQ Q 10.0–0.10 EQ (peaking type) bandwidth
HSH F 50.0 Hz–16.0 kHz High shelving filter frequency
HSH G –12.0 to +12.0 dB High shelving filter gain
*1.
Appendices
Description
(Maximum value depends on the tempo setting)
Description
Reference Manual