Yamaha CL5 Reference Manual page 120

2.
Press the INPUT L button to open the CH SELECT popup window, and select a MIX
channel as the input source for the rack.
For details on the CH SELECT popup window, refer to step 5 of
page 112. The output of the MIX channel you are using as the effect send is now assigned to the
L input of the effect.
If you are using a stereo source, assign the L/R signals of the stereo MIX channel to the L/R inputs
of the rack.
3.
Press the OUTPUT L button to open the CH SELECT popup window, and select the
L input of the desired ST IN channel as the output-destination for the rack.
For details on the CH SELECT popup window, refer to step 6 of
page 112. The L input of the ST IN channel used as the effect return channel is now assigned to
the L output of the effect.
If you are using the output of the effect in stereo, assign the R input of the same ST IN channel to
the R output of the rack in the same way.
NOTE
You can select more than one output destination for the effect.
4.
Press the rack in which you mounted the effect.
The EFFECT popup window will appear, allowing you to edit the effect parameters.
2
1
1
INPUT L/R buttons
Press these buttons to open the CH SELECT popup window. The operating procedure is the same
as for the INPUT button in the GEQ field.
2
"Virtual rack operations" on
3
4
"Virtual rack operations" on
5.
6.
3
4
120
OUTPUT L/R buttons
Press these buttons to open the CH SELECT popup window. The operating procedure is the same
as for the OUTPUT button in the GEQ field.
Input/output meters
Indicate the level of the signals before and after the effect.
MIX BAL. knob
This knob adjusts the balance between the original sound and the effect sound included in the
output signal from the effect. If you press this knob to select it, you will be able to adjust it using
the corresponding multifunction knob.
As necessary, use the multifunction knob to adjust the MIX BAL. knob.
Adjusts the balance between the original sound and the effect sound included in the output signal
from the effect. This parameter is provided for all effect types.
If you are using the effect via send and return, set this to 100% (effect sound only).
NOTE
For more information on setting the effect parameters, see
on page 122.
To adjust the effect send level of an input channel, use the Bank Select keys in the
Centralogic section to access the OVERVIEW screen that includes the input channel
you want to control.
Graphic EQ, effects, and Premium Rack
"Editing the internal effect parameters"
Reference Manual