Yamaha CL5 Reference Manual page 256

Message
Audio file link playback is not possible because recording is in
PlayBack Failed: Recorder is Busy!
progress.
You attempted to edit in the DANTE PATCH screen at a time when
Please wait, Dante patch is proceeding now.
patching was not possible.
The cooling fan of the internal power supply has stopped. If a
malfunction has occurred, please contact your Yamaha service
Power Supply Fan has Malfunctioned!
center listed at the end of the operating manual (separate
document).
Processing Aborted. Processing was interrupted.
When specifying the user password, the password was not
Re-Enter Password!
entered a second time.
RECORDER: CODEC Error [0x%08X] ! A codec error occurred in the RECORDER screen.
Operation of the button was cancelled because time is required
Recorder Busy: Operation Aborted!
for recorder processing.
CUE was cancelled for RECORDER IN because you switched from
RECORDER IN CUE: Turned Off.
the RECORDER screen to another screen.
Removed from the Channel Link group. The channel was removed from the link group.
Saving Aborted. Saving to the USB flash drive has been interrupted.
Saving Finished. Finished saving to USB flash drive.
No data has been stored in the scene you attempted to recall, or
SCENE #xxx is Empty!
the data has been damaged so that it cannot be recalled.
SCENE #xxx is Protected! You attempted to overwrite (store) a protected scene.
SCENE #xxx is Read Only! You attempted to overwrite (store) a read-only scene.
Scene Playback Link Canceled! The audio playback link for the scene was cancelled.
SLOT x: Data Framing Error! Invalid signals are being input from the SLOT x input port.
SLOT x: Data Overrun! Invalid signals are being input from the SLOT x input port.
SLOT x: Rx Buffer Full! Too much data is being received at the SLOT x input port.
SLOT x: Tx Buffer Full! Too much data is being sent from the SLOT x output port.
Some songs were not identified. Songs that have not been
Some Song Files Are Unidentified.
specified might be used for DIRECT PLAY or PLAY BACK LINK.
The file specified for SCENE LINK or DIRECT PLAY assigned to a
Song File Not Found!
USER DEFINED key does not exist.
STAGEMIX: Data Framing Error!
Invalid signals are being exchanged with StageMix.
STAGEMIX: Data Overrun!
STAGEMIX: Rx Buffer Full! Too much data is being received at the StageMix input port.
Too much data is being transmitted from the StageMix output
STAGEMIX: Tx Buffer Full!
port.
The file could not be saved because there is insufficient space on
Storage Full!
the USB flash drive.
Storage Not Found! The USB flash drive could not be recognized.
Storage Not Ready! Access is not possible because the USB flash drive is not ready.
Meaning
Sync Error! [xxx]
Tap Operation Ignored.
This Operation is Not Allowed.
Too Large Files! Loading Failed.
Too Many Bands Used! Cannot Compare.
Too Many EQ Bands Used! Cannot Paste!
Total Slot Power Capability Exceeded!
Unsupported File Format!
USB Currently Active for Recorder function!
USB Currently Active for SAVE or LOAD!
USB Memory Busy: Recorder Stopped!
USB Memory Full !
USB Memory Full! Recorder Stopped.
USB Memory is Protected!
USB Memory Unmounted! Recorder
Stopped.
USB over current Error! Disconnect USB
device.
Word Clock Error! Recorder Stopped!
Wrong Audio File Format!
Wrong Password!
Wrong Word Clock!
You Cannot Create User Key.
256
Message
The CL series console is not synchronized to the [xxx] signal.
Tap operation was ignored because the TAP TEMPO button is not
displayed in the screen.
This operation has been ignored because the current user does
not have permission.
Loading is not possible because the bitmap file is too large. The
maximum supported file size is 307,256 Bytes.
Copying 31BandGEQ and comparing it to Flex15GEQ has failed
because more than 15 bands are included in the copy source.
Copying and pasting 31BandGEQ to Flex15GEQ has failed
because more than 15 bands are included in the copy source.
Power consumption of the I/O cards installed in the slots has
exceeded the rated value.
The file you attempted to load from the USB flash drive is of an
unsupported format.
Save or Load operations are unavailable because the USB memory
recorder is recording or playing.
The recorder cannot operate, since mixer scene memory or library
data is being saved to or loaded from the USB flash drive.
Recording/playback stopped because time is required for USB
flash drive processing.
Can't save the RECORDER playlist because there is insufficient free
space on the USB flash drive.
Recorder processing was halted because the USB flash drive
capacity ran out while the USB memory recorder was operating.
The USB flash drive's Protect setting is turned on.
Recorder processing was halted because the USB flash drive was
disconnected while the USB memory recorder was operating.
The USB device was disconnected because of excessive USB
current.
Recorder was halted because synchronization to the word clock
was lost.
The format of the audio file is invalid.
The password you input was incorrect.
The CL series console cannot synchronize because the source
selected by MASTER CLOCK SELECT in the WORD CLOCK screen
is not appropriate.
The current user does not have permission to create a user key.
Appendices
Meaning
Reference Manual