Moving The Parameters Of A Channel - Yamaha CL5 Reference Manual

3.
To select the copy-source channel, press the corresponding [SEL] key to make it
light.
The corresponding channel is highlighted in the SOURCE CH field of the window.
When you choose the copy-source channel, the DESTINATION CHs field is automatically
bolded, allowing you to select the copy-destination.
If you want to re-select the copy-source channel, press the SOURCE CH field.
NOTE
Copy settings can be made only in the order of "copy-source"
4.
To select the copy-destination channel(s), press the corresponding [SEL] key(s) to
make it light (multiple selections are allowed).
The corresponding channel(s) are highlighted in the DESTINATION CHs field of the window.
The channels that can be selected will depend on the channel you selected in step 3.
If you want to defeat all of the selected copy-destination channels, press the DESTINATION CHs
field.
5.
If you have selected a MIX/MATRIX channel as the copy-source, use the buttons in
the COPY TARGET field to select the parameters you want to copy.
6.
To execute the copy, press the COPY button.
The copy will be executed, and the settings will overwrite the parameters of the copy-destination
channel(s). After the copy has been executed, the SOURCE CH field and DESTINATION CHs
field will be empty.
7.
To close the CH COPY MODE popup window, press the CLOSE button.

Moving the parameters of a channel

The settings of a specific input channel can be moved to a different input channel. When you execute a
Move operation, the numbering of the channels between the move-source and move-destination will
move forward or backward by one.
→
"copy-destination."
You can move settings between the following combinations of channels.
• Between input channels
• Between ST IN channels
1.
2.
73
Move
1 2 3 4 5
1 5 2 3 4
Move by one.
In the Function Access Area, press the CH JOB button
to access the CH JOB menu.
Press the MOVE button to access the CH MOVE
MODE popup window.
Grouping and linking
MOVE button
Reference Manual