Ch Move Mode - Yamaha CL5 Reference Manual

This popup window lets you move channel settings.
1
1
SOURCE CH field
This field indicates the move-source channel. While this window is displayed, press a [SEL] key
on the top panel to select an input channel. This field will indicate the selected channel.
You can move settings between monaural input channels, or between ST IN channels.
2
DESTINATION CH field
This field indicates the move-destination channel. After you select the move source, if you select a
move-destination input channel by pressing its [SEL] key, this field will display the selected channel.
If you want to change the move-source channel, press the [SEL] key for the desired input channel.
NOTE
In the case of the CL3/CL1, faders that do not exist on those models will not be shown.
3
MOVE button
Executes a move operation. After selecting the move-source channel and move-destination
channel, press this button to execute the move.
4
CLOSE button
Press this button to close the popup window and return to the previous screen.
3.
To select the move-source channel, press the corresponding [SEL] key to make it
light.
2
The corresponding channel is highlighted in the SOURCE CH field of the window.
When you select the move-source channel, the DESTINATION CH field will automatically be
bolded, allowing you to select the move-destination.
3
If you want to re-select the move-source channel, press the SOURCE CH field.
NOTE
4 Settings for the Move operation can be made only in the order of "move-source"
destination."
4.
To select the move-destination channel, press the corresponding [SEL] key to make
it light.
The corresponding channel is highlighted in the DESTINATION CH field of the window. The
channels that can be selected will depend on the channel you selected in step 3.
If you want to defeat the selected move-destination channel, press the DESTINATION CH field.
5.
To execute the move, press the MOVE button.
The settings of all channels between the move-source and move-destination will shift toward the
move-source by one channel, and the channel settings will move from the move-source to the
move-destination. When the Move has been executed, the SOURCE CH field and
DESTINATION CH field will be empty.
6.
To close the CH MOVE MODE popup window, press the CLOSE button.
74
Grouping and linking
→ "move-
Reference Manual