Yamaha CL5 Reference Manual page 140

Connecting the CL series console to an SB168-ES
To remotely control the SB168-ES from the CL series console, install an MY16-ES64 EtherSound card
in Slot 1 on the CL, then use an Ethernet cable to connect the CL to the SB168-ES. This connection
enables you to remotely control the SB168-ES from the CL series console.
Alternatively, you can use a daisy chain or ring connection and install two MY16-EX expansion cards
in the slots on the CL unit to remotely control up to three SB168-ES units simultaneously.
NOTE
Remote control data will be received and transmitted only at Slot 1 on the CL series console.
■ Daisy chain connection
CL5
MY16- MY16- MY16-
ES64 EX EX
OUT
IN
SB168-ES
OUT
IN
SB168-ES
OUT
IN
SB168-ES
Audio signal
Remote signal
■ Ring connection
CL5
MY16- MY16-
ES64 EX
OUT
IN
SB168-ES
OUT
IN
SB168-ES
OUT
IN
SB168-ES
OUT
NOTE
Please refer to the SB168-ES Owner's Manual for information on setting up the MY16-ES64/
MY16-EX cards and EtherSound network.
140
I/O rack and external head amp
Audio signal
Remote signal
MY16-
EX
Reference Manual