Dante Input Patch - Yamaha CL5 Reference Manual

■ HA parameter display
This area indicates the head amp settings on the I/O rack in groups of eight ports. Press this area to open
the I/O RACK HA popup window, in which you can make detailed head amp settings.
5
4
3
6
3
Analog GAIN knob
Indicates the analog gain setting. This item is only for display, and cannot be edited.
4
+48V indicator
Indicates the phantom power (+48V) on or off status for each port.
5
OVER indicator
Warns you when the input signal is clipping.
6
HPF indicator
Indicates the high pass filter on or off status for each port.
7
DANTE INPUT PATCH button
Press this button to open the DANTE INPUT PATCH popup
7 window, in which you can select any of 64 channels that will be
input from the audio network to the console.
8
DANTE SETUP button
Press this button to open the DANTE SETUP popup window, in
8
which you can make settings for the audio network.
9
PATCH FROM THIS CONSOLE button
Press this button to configure Dante patches from Dante
9
Controller software.
If this button is on, the DANTE INPUT PATCH and DANTE
OUTPUT PATCH settings can be edited from the CL series console.
If it is off, DANTE patching cannot be edited.
If this button is turned On, the button is always effective regardless
of the On/Off status of the PATCH FROM THIS CONSOLE
buttons on other CL series units on the network.
NOTE
If this button is Off and you try to modify Dante patches or related
data, the message "This Operation is Not Allowed" will appear at
the bottom of the screen.
4.
Press the DANTE INPUT PATCH button to set up the input ports for the I/O rack.
The DANTE INPUT PATCH popup window will appear. This popup window includes the
following items.
1
3
1
LIBRARY button
Enables you to store or recall the DANTE INPUT PATCH setting to or from the library. You can
store ten types of parameter settings.
2
AUTO SETUP button
Automatically patches the devices in ascending order of unit ID number, according to the settings
of the currently-connected I/O racks.
Press the button to display a confirmation popup dialog to confirm the execution of auto
patching. Press the OK button to execute auto patching. Otherwise, press CANCEL to return to
the previous screen.
3
Port select buttons
Press one of the buttons to open the PORT SELECT popup window.
Dante Device ID number (hexadecimal) and channel number (decimal) appear
in the upper row on the button.
The first eight characters of the channel label (Dante Audio Channel Label) for
each port appears in the lower row on the button.
If no patch has been assigned, the upper row will indicate "---" and the lower row will indicate
nothing.
136
I/O rack and external head amp
2
Reference Manual