Scene List - Yamaha CL5 Reference Manual

■ Using the SCENE LIST window
1.
Use the controllers on the top panel or the buttons on the touch screen to set the
mix parameters as desired.
2.
Press the SCENE field in the Function Access Area.
The SCENE LIST window will appear, in which you can perform various scene-related
operations. The window includes the following items.
1
2
5
4
3
6
7
8
90 A B C
1

Scene list

This area lists various data about the scenes stored in memory.
2
NO./TITLE buttons
Press these buttons to sort the listed scenes by number or title. Press the same button repeatedly
to toggle between ascending order and descending order.
3
Scene number
Indicates the current scene number.
4
Scene title
Indicates the scene title. Press this title to display the SCENE TITLE EDIT popup window, in
which you can edit the title.
D
5
Write-protect
Indicates the Write Protect on/off status. Press this button to write-protect the scene. A lock icon
will appear. Press it again to cancel write protection.
6
Current scene
The currently-selected scene (that is, the current scene) is highlighted in blue in the list. If you
press another scene number in the list, the list will scroll and that scene will become the current
scene.
7
SCENE SELECT knob
Use the multifunction knobs to select a scene. You can view the currently-selected scene number
immediately below the SCENE SELECT knob.
8
MULTI SELECT button
You can select consecutive multiple scenes by turning on this button and rotating the
multifunction knob. If this button is off, you can still select consecutive multiple scenes by
rotating the multifunction knob while pressing and holding it down.
9
LAST SCENE button
Press this button to select the scene that was recalled most recently.
0
STORE SCENE popup button
Press this button to display the STORE SCENE popup window, which will enable you to assign a
name to a scene and store it.
A
STORE UNDO button
Undoes the Store operation. This button is valid only immediately after you perform an
Overwrite-store operation.
B
RECALL SCENE button
Recalls the currently-selected scene.
C
RECALL UNDO button
Undoes the Recall operation. This button is valid only immediately after you perform a Recall
operation.
D
Page switching tabs
Switch views on the right side of the scene list.
3.
To store a scene, rotate one of the multifunction knobs to select the store-
destination scene number.
NOTE
• You can select multiple scene numbers as the store-destination. To do so, press the MULTI
SELECT button to turn it on, and then rotate a multifunction knob. Alternatively, rotate the
multifunction knob while pressing and holding it down.
• If you selected multiple scenes as the store-destination, the same contents will be stored in all
selected scene numbers. This is convenient if you want to create several variations based on the
same mix settings.
• You can also use the SCENE MEMORY [INC]/[DEC] keys to select scene numbers.
78
Scene memory
Reference Manual