Outputting A Control Signal To An External Device In Tandem With Scene Recall (Gpi Out) - Yamaha CL5 Reference Manual

Outputting a control signal to an external device
in tandem with scene recall (GPI OUT)
A contol signal can be output to an external device connected to the GPI connector of the CL series
console when you recall a specific scene. Proceed as follows.
NOTE
For more information on the GPI OUT settings, refer to
1.
Press the SCENE field in the Function Access Area.
The SCENE LIST window will appear, in which you can perform various operations for scene
memory.
2.
Press the GPI OUT tab at the bottom of the SCENE LIST window.
The GPI OUT field will appear.
"Using GPI OUT" on page 207.
1
2
92
1
Output control signal select buttons
These specify the control signal will be output from each GPI OUT.
Pressing a button repeatedly will switch between the following functions.
• –––– (OFF) ................ Nothing will be output.
• TRIGGER .................. A trigger will be output when the scene is recalled.
• TALLY ........................ A tally will be output when the scene is recalled.
2
CURRENT SETTING field
Specifies the content that will be saved by the next scene store operation. Changes made here are
immediately reflected on the CL series console.
3.
For each scene, specify the control signal that you want to output to each GPI OUT
port.
4.
Recall the scene for which you want to output GPI OUT signals.
When you recall the scene, the control signals will be output to the external device connected to
the GPI OUT connector.
Scene memory
Reference Manual