Yamaha CL5 Reference Manual page 33

Dgital mixing console yamaha cl5; cl3; cl1
Hide thumbs Also See for CL5:
Table of Contents

Advertisement

■ If you press the ANALOG GAIN parameter select button:
2
3
1
4
1
GAIN knob
Indicates the analog gain setting for each channel. Press this knob to control the gain value using
the multifunction knob. If the Gain Compensation function is turned on, an indicator will appear,
showing the position of the analog gain when the function is turned on.
2
OVER indicator
Lights when a signal at the input port or from the rack output exceeds the full scale level. This
indicator is available only if an input channel is selected.
3
+48V indicator
Indicates the +48V on/off status for each channel.
4
Ø (Phase) indicator
Indicates the phase setting for each channel.
NOTE
If the input channel is patched to a slot for which the connection to the head amp is not
1
recognized, the knob
will be replaced with the slot/port number of the patch destination. In
3
addition, the indicator
will not be displayed.
If the input channel is patched to the VIRTUAL RACK, the knob
ID of the rack.
If nothing is patched to the input channel, the knob
■ If you press the DIGITAL GAIN parameter select button:
2
1
3
1
GAIN knob
Indicates the digital gain setting for each channel. Press this knob to control the gain value using
the multifunction knob.
2
OVER indicator
Lights when a signal at the input port or from the rack output exceeds the full scale level. This
indicator is available only if an input channel is selected.
3
Ø (Phase) indicator
Indicates the phase setting for each channel.
1
will be replaced with the port
1
will be replaced with a dotted line "----" .
■ If you press the PATCH parameter select button:
1
1
PATCH button
Press this button to open the PORT SELECT popup window, in which you can select an input port
to patch to the channel.
4.
Access either the 1ch or 8ch GAIN/PATCH popup window.
5.
Use the on-screen buttons or the multifunction knobs to edit the head amp gain,
phase, and phantom power on/off settings.
NOTE
• The PAD will be switched on or off internally when the HA gain is adjusted between +17 dB and
+18 dB.
• Keep in mind that noise may be generated when using phantom power if there is a difference
between the Hot and Cold output impedance of an external device connected to the INPUT jack.
• The GAIN knob, +48V button, and Ø button are valid only on channels for which the assigned
input port is an INPUT jack on the I/O rack, the OMNI IN on the CL unit, or a slot that is connected
to an external head amp device (e.g., Yamaha AD8HR or SB168-ES).
6.
Perform the same operations for other input channels as desired.
If you are viewing the 1 ch GAIN/PATCH popup window, you can also use the [SEL] keys to
switch the channel for editing.
If you are viewing the 8 ch GAIN/PATCH popup window, you can use the Bank Select keys in the
Centralogic section to switch the channels being controlled in groups of eight.
7.
When you finish editing, press the × symbol in the upper right of the window.
33
Input channels
Reference Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cl3Cl1

Table of Contents