Copying, Moving, Or Initializing A Channel - Yamaha CL5 Reference Manual

Copying, moving, or initializing a channel

You can copy or move mix parameters between channels, or restore the parameters of a specific channel
to their default settings.
Copying the parameters of a channel
You can copy the mix parameter settings of a channel to another channel. When you execute the copy
operation, the settings will overwrite the parameters of the copy-destination.
You can copy between the following combinations of channels.
• Between input channels
• Between the STEREO L/R channel and MONO channel
• Between MIX channels
• Between MATRIX channels
1.
In the Function Access Area, press the CH JOB button to
access the CH JOB menu.
2.
Press the COPY button to access the CH COPY MODE
popup window.
This popup window enables you to copy channel settings. The
window contains the following items.
1 4
COPY button
2 3
1
SOURCE CH field
This field displays the copy-source channel. While this window is displayed, press a [SEL] key on
the top panel to select a channel. The field will indicate the selected channel.
Before selection
If the copy source is a MIX/MATRIX channel, buttons will
appear so you will be able to select parameters to copy.
If these buttons are turned on, the following parameters will be
copied:
• COPY TARGET
Selected channel module parameters + SEND parameters for
the signals sent to the selected channel
• MODULE PARAMETERS
Selected channel module parameters
• WITH MIX SEND
SEND parameters of signals sent to the selected channel
2
DESTINATION CHs field
This field displays the copy-destination channel. After you
select the copy source, if you select a copy-destination channel
by pressing its [SEL] key (multiple selections are allowed), this
field will display the selected channel.
NOTE
In the case of the CL3/CL1, faders that do not exist on those
models will not be shown.
3
COPY button
Executes the copy operation. After selecting the copy-source channel and copy-destination
channel(s), press this button to execute the copy operation.
4
CLOSE button
Press this button to close the popup window and return to the previous screen.
72
Grouping and linking
After selection
Reference Manual