Yamaha CL5 Reference Manual page 66

In this popup window you can select the channels that will be assigned to each mute group. The
popup window includes the following items.
2
3
4
6
7
1
CLEAR ALL button
Clears all channels that are assigned to the currently-selected mute group.
2
DCA GROUP ASSIGN/MUTE GROUP ASSIGN buttons
Toggle between the DCA GROUP ASSIGN popup window and the MUTE GROUP ASSIGN
popup window.
3
Mute group assign field
This area displays the channels assigned to the currently-selected mute group.
While this window is displayed, press the [SEL] key for the channel that you want to assign to the
mute group. The on-screen fader for that channel will turn red and the channel will be assigned
to the mute group. Press the same [SEL] key once again if you want to remove the channel from
the group.
If the MUTE SAFE button is on, this field displays the channels that are targets for mute safe (that
is, excluded from the mute groups). The operation procedure to apply or cancel mute safe to the
channels is the same as that for assigning or removing channels to or from a mute group. The on-
screen faders of the assigned channels will turn green.
4
Mute group select button
Selects the mute group that you want to assign.
5
MUTE SAFE button
Use this button if you want to temporarily exclude a specific channel from all mute groups. The
mute group assign field displays the channels that are temporarily excluded from the mute groups.
For more information on mute safe, "Using the Mute Safe
1
5
function" on page 69.
66
6
MUTE GROUP MASTER button
Switches the corresponding mute group on or off.
7
DIMMER LEVEL knob
Sets the dimmer level for the corresponding mute group when the dimmer function is enabled.
NOTE
• In the case of the CL3/CL1, faders that do not exist on those models will not be shown.
• If the dimmer level is set to any level other than –∞ dB, and the corresponding MUTE GROUP
MASTER button is turned on, this button will light orange.
3.
Use the MUTE GROUP 1–8 buttons to select the mute group to which you want to
assign channels.
4.
Press the [SEL] key for the input channels/output channels that you want to assign
(multiple selections are allowed).
The [SEL] keys for the assigned channels will light, and the corresponding channels will be
highlighted in red in the mute group assign field of the window. To cancel an assignment, press a
lit [SEL] key once again to make it go dark.
5.
Assign channels to other mute groups in the same way.
NOTE
You may assign a single channel to more than one mute group.
6.
When you finish making assignments, press the CLOSE button to close the popup
window, and press the × symbol in the Function Access Area (CH JOB display).
You will return to the previous screen. The DCA/MUTE GROUP field of the OVERVIEW screen
indicates the mute group(s) to which each channel is assigned. Numbers that are lit red in the
lower row of this field indicate the mute groups to which that channel belongs.
NOTE
If the dimmer level is set to any level other than –∞ dB, and the corresponding MUTE GROUP
MASTER button is turned on, these numbers will light orange.
For a channel for which the Mute Safe function (see
indicator will light up green at the right end of the bottom row.
Grouping and linking
page 69) has been turned on, an "S"
Reference Manual