Saving The Parameters Modified - KETRON SD1 User Manual

SAVING THE PARAMETERS MODIFIED

The parameters that can be saved within a Midi file are indicated in the XXX table and also include the volume balance between Midi file and
keyboard, the Tempo value, the settings of the Drum Mixer, the timbre for the Right section and the settings for the Vocalist track. The saving
function is called up only when the Midi file is stopped and must be used only within the F1 GM Part menus. It is therefore important to save
each modification within F1 GM Part before returning to the main page of Song Play, using the SAVE/ENTER function that enables the rela-
tive page. It is used to enter a new name for the Midi file, which otherwise will be overwritten, using the keyboard keys and the CURSOR +/-
push buttons. To cancel the procedure press F5 Escape, to save and cancel the previous settings press F9 Remove or to confirm saving press
F10 Execute. The Midi file thus modified is saved in the same folder from which it was loaded.
SAVE SONG SETUP PARAMETERS
- Program Change
- Effects
- Volume
- Tempo
- Drum Mixer
- Transposer ( Global/Song )
- Pan
- Note Shift
- Song Balance
- Right Hand Voice
75
Owner's Manual SD1