KETRON SD1 User Manual page 53

ARRANGE VIEW: FIRST PAGE
Further to modifying the volume for the single tracks and the Lower parts, the SD1 allows you to activate the Mute function on a single trace.
This setting will remain stored also for the next Styles.
In order to activate the Mute function on a track, select the track pressing the relevant function button and then press both VALUE +/- buttons
at the same time.
If you wish to restore the initial volume value, press one of the two VALUE +/- push buttons.
In order to modify the volume of a track or of a part, select it with the relevant function push button.
Modify the volume value using the VALUE +/- push buttons.
The Mute function is activated only by pressing both VALUE +/- push buttons at the same time, and not by setting the value to zero.
Only for the Lower parts you may establish a different volume value for the single Arranger sections.
ARRANGE VIEW: SECOND PAGE
The reverb quantity of each track and for the Lower parts remains unvaried for all Style sections. To carry out any modification, select the track
or the part pressing the relevant function button. Modify the value pressing the VALUE +/- buttons.
ARRANGE VIEW: THIRD PAGE
For each Lower part or track it is possible to establish which effect (Chorus, Delay or Distortion) is to process the timbre, further to the quan-
tity of the effect applied.
To modify this setting, select the track or the part using the relevant function button, then press the same function button repeatedly until the
effect to be assigned is displayed. On the selected track or part, use the VALUE +/- push buttons to enter the quantity of effect to be applied
to the timbre.
53
Owner's Manual SD1