How To Create Or Modify A Drum Set - KETRON SD1 User Manual

The second page is used to control the volume of the single groups to be selected with the relevant function keys. The volume of the selected
group can be modified from value 1 to 15 using the VALUE +/- buttons.
The third page is used to control the reverb quantity of the single groups to be selected with the relevant function keys. The reverb quantity of
the selected group can be modified from value 1 to 15 using the VALUE +/- buttons.
The fourth page is used to control the pan value (stereo position) for the single groups to be selected with the relevant function keys. The pan
value of the selected group can be modified in steps of 64 to the right (R) or to the left (L) using the VALUE +/- buttons. Pressing both VALUE
+/- buttons at the same time brings the pan back to the neutral value, i.e. in the centre (—).

HOW TO CREATE OR MODIFY A DRUM SET

he SD1 makes it possible to create and program a Drum Set to be stored among the User Drum Sets and to be used in the styles. If you wish to
access the editing pages, press the EXIT button to go to the main page and then press F9 Edit Drum.
You are now able to edit the Drum Set presently selected and shown in the centre of the display, under which the destination User Drum Set for
storage is shown, which cannot be modified if you do not select a different source Drum Set for the editing procedure. In fact the association
between the preset Drum Sets and the User Drum Sets is prearranged.
43
Owner's Manual SD1