KETRON SD1 User Manual page 102

F8 Vol. Select: This is used to select the call-up mode of the Voices. In Mode 1 the last Voice selected within a single family is always
automatically called up. To change it simply select another Voice within the same family. In Mode 2 the Voice is enabled
only after it has been selected using the function push buttons within a family, so that the Voice in use is not replaced
just by calling up a family.
F9 4 Sw Mode: This function is used if connected to a Solton MIDI pedal and to the special pedal for guitarists with four switches for
changing the tonality. When the parameter is set as On, each new change of tonality is held even if the relative switch
is not held down. In Off the tonality variation remains in use only for the time during which the switch is pressed and
then it returns to a major tonality.
F10 Song Expr: When set on Yes, the volume pedal controls the global level of the Song.
UTILITY, PAGE 3/3
Using the PAGE + push button access is gained to the following parameters:
F1 2ND Sust.: This enables or disables the Sustain on the Second Voicee
F2 2ND Split: This enables a second split point dedicated only to the use of the Second Voice. The value is entered directly from the key-
board or using the VALUE +/- push buttons.
F3 Arab. Mode: This enables the use of the Arabic scale.
F4 Micro: By selecting Dry On Stop, each time the Arranger is stopped using the START push button (Stop) the effects on the micro-
phone signal are disabled.
F5 Low. Hold: This enables or disables the chord holding on the two Voices assigned to Lower with the Arranger not running.
F6 Password: This is used to set the password for the hard disk folders in use that require such procedure (see Disk section) to protect the
writing and reading of data. The password is assigned to the hard disk folder currently in use, namely the last folder that
was used in order of time, using F1 Modify. If no password is assigned to the Folder, type in the new name in the line called
New using the keyboard keys. The name must be made up of no more than six letters. Confirm using F10 Confirm. If there
is an old password and this is to be changed, first type in the old name in the line called Old and then the new one in line
called New and then confirm using F10 Confirm. F5 Escape returns to the main page of the display, F6 Flash Ins is used
for any Styles up-dates produced by Ketron.
F7 Chorus Lck: When set as On, it keeps the chorus of the Voice selected locked even if the Voice is changed and Midi files are played.
F8 Vocal Ch: This is used to lock (Locked) the MIDI channel selected to control the Vocalizer whatever the source Midi file. In this way
you avoid having to set the same MIDI channel for different Midi files each time.
F9 Song Play: This selects the access time to a Midi file in Hard Disk between Normal, in other words starting from the first beat of the
first measure, and Fast that skips the reproduction directly at the beginning of the Midi file, ignoring its measures having
no notes. In this way you can reproduce a number of Midi files without stopping.
F10 Delay Lck: This is used to lock the type of delay currently in use in the same way as F7 Chorus Lck.
102
SD1 Owner's Manual