KETRON SD1 User Manual page 136

SAVE: A recorded or loaded sequence can be saved on disk in the midi file format by using the SAVE function. The
SAVE procedure is similar to the LOAD one, except that F6 (SAVE) must be pressed instead of F1. Once a name has
been assigned to the sequence that will be saved, press F10 (Execute) to confirm the operation. Press F5 (Escape)
to exit the menu without performing any operation. We recommend that you save the sequence not only at the
end of your work session but also before performing risky operations such as Delete, Mixdown, Copy/Move. In this
way, should any of these operations not give you the desired results, you can always use LOAD to reload your ori-
ginal sequence. After saving, press F5 to return to the main menu.
136
SD1 Owner's Manual