Saving A User Voice; Saving All The User Voices On Disk - KETRON SD1 User Manual

SAVING A USER VOICE

A modified User Voice must be saved permanently in the memory otherwise the modification will be lost when the SD1 is turned off. The sav-
ing procedure appears automatically after even only one parameter has been modified and the user attempts to exit the programming menu
using EXIT, or by pressing the SAVE/ENTER push button to enable the saving procedure. In both cases the page that appears shows the desti-
nation memory location with the name of the User Voice taken at the time. To change the destination memory use function push buttons F2
>> and F3 <<, or directly enter the destination number using the numeric keypad STYLES, or again using the VOICES push buttons relative to
the timbre faimily to move onto the next group of memories. The page is also used to modify the name to be given to the User Voice, using the
keys of the keyboard. To confirm the procedure press F10 SAVE.
F5 Escape: This cancels the saving procedure.

SAVING ALL THE USER VOICES ON DISK

The entire contents of the User Voice bank can be saved on hard disk or floppy disk by using the following procedure that varies based on
whether the Master Folder function is enabled or otherwise.
With Master Folder disabled:
Press DISK and select the destination disk using push buttons PAGE +/-.
Go to the desired folder by entering the number using the numeric keypad relative to the STYLES push buttons.
Enable the saving procedure using F3 Save.
Select F9 User Voice from the page that indicates the type of file to be saved.
A page appears where the name of the file is to be entered using the keyboard keys.
Confirm the procedure using F10 Exec, or cancel using F5 Escape.
With Master Folder enabled:
Press DISK to access the Disk menu.
Enable the saving procedure using F3 Save.
Select F9 User Voice.
A page appears where the name of the file is to be entered using the keyboard keys.
Confirm the procedure using F10 Exec, or cancel using F5 Escape.
The User Voices are saved in Folder 98.
27
Owner's Manual SD1