Storing And Saving The Custom Styles - KETRON SD1 User Manual

ARRANGE VIEW: FOURTH PART
The pan function, with different values for Right and Left, allows you to position the timbre on the stereo panorama. To modify the setting, select
the track or the part using the relevant function button and change the value pressing the VALUE +/- push buttons. Two dashes indicate that
the timbre is placed to the centre of the stereo panorama.

STORING AND SAVING THE CUSTOM STYLES

All Arrange View parameters described and RETRIGG MODE of ARRANGE MODE so far must be saved in a Custom Style so you can call them
up later on. Use the normal procedure foreseen for the Save/Enter command.
STORING A CUSTOM STYLE
After having modified the parameters, press the SAVE/ENTER button to activate the storage operation.
Select F2 Styles from the page displayed.
Enter the Style name using the keys of the keyboard and the CURSOR +/- push buttons.
Confirm the operation pressing F10 Save or exit the page pressing F5 Escape. The modified parameters are saved together with the Style
in the Flash RAM memory.
SAVING ALL CUSTOM STYLES ON A DISK
You may save all Custom Styles in one single block on the disk. This operation will be easier to carry out if MASTER FOLDER is activated.
Open the DISK menu pressing the relevant push button.
Activate the Master Folder function, if not yet selecting, pressing the relevant push button (the LED lights up).
Select F5 Folder Choice.
From the page displayed select F5 Styles. The display shows the contents of the folder dedicated to the Styles.
Press F3 Save to activate the saving procedure.
Select F6 Custom Styles.
Enter the file name using the keyboard keys and the CURSOR +/- push buttons.
Confirm the operation pressing F10 Exec or quit the procedure pressing F5 Escape.
The file thus created contains all the Custom Styles and has the extension .STY.
54
SD1 Owner's Manual