F2 Parameter - KETRON SD1 User Manual

F8 Rec/Play: This is used to switch between recording (Rec) of the Section and reproduction (Play). To play back any Section, even
without modifying it, it is to be selected using F1 Section and then to be played back using F7 Play. By enabling the
Arranger using START and by playing a chord, split point permitting, you can playback the Section involved as many
times desired.
F9 Velocity: This is used to modify the velocity values of one or all the notes of the track when selected. By enabling the function
a new page with the following parameters is accessed:
F10 Clear: This is used to cancel the contents of a track in a different manner for the Drum tracks and the lead tracks (including
Bass). It is indeed possible for the Drum tracks to also select the note to be cancelled. Once the Drum track to be mod-
ified has been selected, press and hold down the F10 Clear push button. A new window will appear with the following
parameters:
Finally there are two aspects to bear in mind when recording:
The changes of tempo using SLOW and FAST are recorded on Drum 1 track.
When recording on a track that already bears some musical data, these will not be cancelled. In other words the next registration adds the
notes played by means of an over-dubbing process.
Press the EXIT key to return to the initial page of Pattern Edit.

F2 PARAMETER

From the Edit Pattern menu you can select this page where some overall parameters for the whole Pattern can be modified. It is preferable
to set these parameters before starting to record a track or a Section. Some of these parameters can only be modified with a Pattern just cre-
ated where nothing has already been recorded.
F1 Tempo: Its default setting is 120 bpm. This value can be modified using the SLOW and FAST push buttons or VALUE +/-.
F2 Time Signature: This establishes the musical division. The values can be modified using the VALUE +/- push buttons and by pressing F2
Time Signature again to switch the position in the division.
F3 Autocrash: If enabled (√), a Crash will be played at the end of every Fill In, Break and Intro.
F4 Crash Level: This establishes the Crash volume related to the Autocrash. It is modified using the VALUE +/- push buttons.
F5 Escape: This is used to return to the main Edit Pattern menu
F1 Global: Select this to modify all the notes within the track.
F2 Note: This is used to select the note of which the velocity is to be modified by simply playing it on the key-
board.
F3 Value: This establishes the increase or decrease value to be given to the velocity of the note selected using
F2 Note, or of all the notes using F1 Global. The value is entered using push buttons VALUE +/-.
F10 Execute: This executes the modification.
F5 Escape: This is used to cancel the whole procedure unless it has been previously confirmed using F10
Execute, and sends to the previous page F1 Record.
F2 Tempo: This is present only for Drum 1 track. If you select this function any Tempo data recorded will be
cancelled.
F3 Note: This is used to cancel a single note. By holding down F10 Clear of the previous page, play the note to
be cancelled on the keyboard. It will be cancelled immediately without having to confirm.
F5 Global: Press this push button to cancel the whole Drum track.
With regard to the lead track it is possible only to cancel the whole track. Select the track to be cancelled and
hold down F10 Clear and a new page will appear with:
F5 Global: By selecting this function the whole contents of the track are cancelled immediately, without hav-
ing to confirm.
63
Owner's Manual SD1