Setting The Password For Protected Folders - KETRON SD1 User Manual

is used to enter the name using the keyboard keys and the CURSOR +/- push buttons. Once the name has been entered,
confirm the procedure using F10 Exec, or cancel it using F5 Escape.
F2 Delete: This is used to cancel the Folder selected using the VALUE +/- push buttons or by typing in the number and all
the files within it. When you confirm the cancelling procedure a warning message will appear with the F5 Escape or F10
Exec options. If you confirm using F10 Exec. A second message appears requesting further confirmation to cancel with
F10 Exec, or to cancel the procedure using F5 Escape. The Folders relative to Master Folder cannot be cancelled.
F3 Rename: This is used to re-name a Folder, selected using the VALUE +/- push buttons or by typing in the number,
writing the name using the keyboard keys and the CURSOR +/- push buttons. Confirm the procedure using F10 Exec or
cancel it using F5 Escape.
F4 Lock: This protects the Folder from being Deleted or Re-named. To enable the lock function select the Folder using
the VALUE +/- push buttons or type in its number and then press F4 Lock. The symbol ® will appear next to the Folder.
A number of Folders can be locked. To disable the lock function, find the folder protected and then press F4 Lock again.

SETTING THE PASSWORD FOR PROTECTED FOLDERS

The Folder of the Hard Disk that have been protected with the F4 Lock function in the F8 Folder page of the Disk menu can be additionally
protected by assigning a password that will be requested when disabling the lock function. The password is modified in the following manner:
From the main page of the display press F3 Utility.
Press the PAGE +/- push buttons to reach page 3/3.
Press F6 Password to access the dedicated menu.
The options possible are the following:
F1 Modify: This is used to modify the password. When you purchase the instrument there is no password therefore its modification also
corresponds with its creation. The modification command requests the entry of the old password, using the keyboard keys and
the CURSOR +/- push buttons and an initial confirmation command using F10 Confirm. The new name can then be entered and
confirmed using F10 Confirm. F5 Escape is used to return to the main page of the menu. The F6 Flash function is reserved
for future up-dates and must not be disabled for any reason whatsoever unless under the strict supervision of experts.
F5 Escape: This is used to return to the previous page of the Disk menu.
F6 Report: This creates a TXT file on Floppy Disk that shows the whole contents of the Folder currently selected, split-up per extension and
in alphabetical order. The file can be read both from Mac and PC and can prove quite useful to have a list of files when there
are many of files stored.
F7 Copy: This is used to copy the file, selected using the VALUE +/-, CURSOR +/- and F10 Select push buttons from the Folder currently
selected and a Folder at choice within the Hard Disk. The options possible are the following:
F5 Escape: This is used to return to the previous page of the Disk menu.
F8 Target Folder: This displays the list of Folders in the middle of the display amongst which you can choose that
desired using the VALUE +/- push buttons.
F10 Exec: This confirms that the file selected is to be copied in the chosen Folder using F8 Target Folder.
F9 Utility:
118
SD1 Owner's Manual
The complete procedure entails the following steps:
Select the Folder in which the files to be copied are stored.
Press F7 Copy.
Select one or a number of files to be copied using the VALUE +/-, CURSOR +/- and F10 Select push buttons.
Press F8 Target Folder and find the destination Folder using the VALUE +/- push buttons from the list that
appears.
Confirm the procedure using F10 Exec, or cancel it using F5 Escape.
Press F10 Exec and a new page appears in which the file being copied can be re-named using the keyboard
keys and the CURSOR +/- push buttons. The options possible are the following:
F5 Escape: This cancels the procedure and returns to the Disk menu.
F8 Skip: This skips the copying procedure of the current file.
F9 Copy All: This copies all the files without re-naming them.
F10 Execute: This confirms that the single file is to be copied.