Using A Midi Pedal - KETRON SD1 User Manual

Using a MIDI pedal

The SD1 enables the connection of a MIDI pedal to control the manual bass line and to set the chords. The MIDI reception channel is to be set
for the bass part on the same transmission channel as the pedal, by proceeding as follows:
Connect the MIDI pedal to MIDI In 2 (Keyboard).
From the main page of the display press F6 MIDI.
Select F2 Channel Receive.
Find the Bass parameter using the CURSOR +/- push buttons and modify the receiving MIDI channel using the VALUE +/- push buttons based
on that of the pedal.
Enable the MANUAL BASS push button to use the pedal in organ player mode with the bass timbre associated to the Style in use.
The pedal can also be used to add chords, however, when it is used alone it cannot play above the Major chords. To modify the tonality of the
chords use the optional pedal switches FS13 and FS6 or use a pedal with four switches for guitarists (Mod. 9AC101) that has a special method of
adding tonality variations. Proceed as follows to enable it:
From the main page of the display press F3 Utility.
Move onto page 2/3 using the PAGE +/- push buttons.
Press F9 4Sw. Mode to set as On
The MIDI parameters modified can be saved in a MIDI Set-up whereas the status of 4Sw. Mode can be saved in a Registration.
110
SD1 Owner's Manual