Power On Set Up - KETRON SD1 User Manual

Power On Set Up

Some of the most important settings programmed for the use of your SD1 can be stored in such a way that they are automatically called up
when turning the instrument on, thus avoiding loss of time to re-program them. The parameters are not grouped on the same page, but dis-
tributed in a number of menus such as Arrange Mode, Arrange View, MIDI as well as the push buttons on the control panel. The following table
reports all the parameters that can be stored and automatically set on turning the instrument on.
Style Custom/Factory (led)
1 Touch (led)
4 switch mode
Accordion Mode
Arabic mode
Autocrash
Bass Lock
Bass to Lower
Bass Octave
Bass Mono / Poly
Fingered
Finger 2
Easy 1
Easy 2
Song Balance
Registration
Switch On / Off
Modulation Amount / Rate
Vocalist Active-Inactive-Internal - None
Bass to Pedal
Bass hold
Bass Retrigg. Accordion
Fixed Dynamic Value
For this function just one invisible memory location exists, that is maintained even when the keyboard is Off. There is, however, the possibility
to store a number of Power On Set Up settings on the disk.
If you feel that your present setting is the optimal one for the parameters listed in the above table, you may store or save them on the disk
using the following procedure:
Press the SAVE/ENTER button to activate the procedure.
Select F3 Power On Setup.
The following four functions are displayed:
F5 Escape: deletes the operation and returns to the main page of the display.
F8 Disk Save: Saves the Power On Set Up to the disk you selected before confirming the saving in Flash RAM. If Master Folder is activated,
a file with the name Setup.PON is created and saved in Folder 98 Userfiles. To save another Power On Set Up file it is neces-
sary that the previous one is renamed using the Rename function in the Disk menu (please refer to the Disk section). If
Master Folder is not active, the file will be saved in the folder selected last. In this case, too, you will need to rename the
saved file before you can save a new setting in the same folder.
F9 Default: This restores the initial conditions of all parameters included in the above table. F10 Save: This saves the settings in the
Flash RAM memory of the SD1.
68
SD1 Owner's Manual
Song Expression
Midi Menu
Microphone Active / Inactive
Lower off on stop
Music Volume
Initial User Folder
Delay Lock
Micro Dry On Stop
Setup Video mode, color zoom
Pianist Mode (standard, auto)
Tempo Step
Arranger lock
Automatic switch off registr.
Global Bass retrigger
Hold on stop
Live Drum
Interactive Arrange
Bass Boost
Out Levels ( Menu Effects)
Timbres selection mode
Styles selection mode by numbers or by pages
Gm Tx-Rx channels
Dynamic Arranger
Dynamic Curve
Equalizer
Font 1-2 text lyric
Global transposer
Global Tune
Harmony type
Lower 1 Hold
Lower 2 Hold
Lower Lock
Pattern (led)
Pedalboard
Pianist Sustain
Portamento time
Reverb Level
Reverb Lock
Separate Out Assignment
Split point
Sustain 2nd voice
Swell to right
Sync time
Enhancer
Master Volumes