7.6.4 Ending Conference
Prerequisites
Only the chairman can perform this operation.
Context
If the conference topics come to an end but the time is not expired, the chairman terminal
can perform the following operations to end the conference in advance.
The following describes how to end a conference by using the remote control. Alternatively,
you can log in to the PC console and click End Conf.
Steps
1. In a conference, press the Conference key by using the remote control.
Conference page is displayed.
2. Choose Conference Management > End Conference and then press the OK key on
the remote control.
– End of Steps –
SJ-20100910163147-001|2010-11-23(R1.1)
Chapter 7 Common Conference Control Operations
7-11
ZTE Proprietary and Confidential
The