Viewing Current System Version - Zte ZXV10 T700 User Manual

ZXV10 T700 Operation Guide
3. Select a terminal (after it is selected, the check box next to its name is selected), and
the click OK. The selected terminal is displayed in the Meeting list box.
4. Refer to the following table to configure the parameters , such as conference rate,
number of pictures, service number, password, and duration.
Item
Conference Rate
No. of Picture
Service Num.
Password
Min. (m)
5. After the settings, click Call to call for the conference.
– End of Steps –
Example
For example, to call for a conference with the conference rate of 1920 kbit/s, the conference
template named with 1920 must exist in the ZXMS80 system.
Follow-Up Action
If the conference is successfully called, the MCU calls all the terminals automatically.

6.2 Viewing Current System Version

Context
This operation helps to learn the current system version. The version information is for
view only and cannot be modified.
Steps
1. Choose Management > Diagnosis > Version Info. by using the remote control.
Alternatively, you can log in to the Web page and choose System Diagnose >
Versions. The Versions page is displayed.
2. View the related information. Software Version shows the current system version.
– End of Steps –
SJ-20100910163147-001|2010-11-23(R1.1)
Configuration Method
Selects a conference rate.
Selects the number of
pictures.
Usually, it is 198. It is
recommended to use the
default value.
It can contain 1 to 6 Arabic
numerals.
Enters the conference
duration.
6-2
Description
It must be consistent with the conference
rate configured on the MCU.
Up to 2 pictures can be provided by this
version.
Terminals can call the conference through
the conference special number.
It is the password used by a terminal to
actively join the conference.
The unit is minute.
ZTE Proprietary and Confidential