Presetting Camera; Activating Preset Position - Zte ZXV10 T700 User Manual

ZXV10 T700 Operation Guide

4.2 Presetting Camera

Prerequisites
The function of presetting a camera is restricted by camera model. The camera of the
ZXV10 T700 terminal supports this function.
Context
After you preset the angle of a camera, the camera can automatically adjust to the preset
angle next time. The camera of the ZXV10 T700 terminal has 10 preset positions ranging
from 0 to 9.
The following describes how to preset a camera by using the remote control. Alternatively,
you can log in to the Web page and preset a camera by choosing System Control > Video
Control or log in to the PC console and preset a camera by clicking Preset Position.
Steps
1. Adjust the camera to the preset position, for example, make the camera face the
conference host.
2. In the active video, press the Camera key on the remote control and choose Preset
Camera to display the corresponding page.
3. Select a preset position by using the remote control, for example, position 2, and press
the OK key. In this case, the camera in position 2 is selected, which indicates that the
current camera is successfully preset to position 2.
4. To clear a preset position, move the cursor to the position No. and press the OK key on
the remote control. Then, the check box next to the position is cleared, which indicates
that the preset position for the current camera is cancelled.
– End of Steps –
Follow-Up Action
After a camera position is preset successfully, you need to activate the preset camera
position and then use it.

4.3 Activating Preset Position

Prerequisites
l
The video source is switched to the camera for which the preset position is to be
activated. For example, to display the preset lens of the main video source, switch
the video source to the main video source first.
l
The preset position is already configured. For example, the preset position that
faces the conference host is already configured. For details, refer to
Camera".
SJ-20100910163147-001|2010-11-23(R1.1)
4-2
ZTE Proprietary and Confidential
"4.2 Presetting