ZXV10 T700 Operation Guide
5.1.2 Setting Volume Display Mode
Context
According to requirements, you can determine whether to display the volume bar on the
TV screen.
Steps
1. Choose Management > General > Display by using the remote control or after logging
in to the Web page. The Display page is displayed.
2. Refer to the following table and select the required volume display mode from the
Volume OSD Option drop-down list.
Display Mode
Hide Volume
Show Input Volume
Show Output Volume
Show All Volume
3. Save the settings and exit.
– End of Steps –
5.1.3 Showing or Hiding Remote End Name
Context
According to requirements, you can determine whether to display the remote end name
on the TV screen.
Steps
1. Choose Management > General > Display by using the remote control or after logging
in to the Web page. The Display page is displayed.
2. Select Receiving Terminal from the Name Option drop-down list. Then, the TV
screen displays the remote end name.
SJ-20100910163147-001|2010-11-23(R1.1)
Description
The volume bar is not displayed on the TV screen.
Only the volume of local input is displayed on the TV screen.
Only the volume of local output is displayed on the TV screen.
The volume of input and output is displayed simultaneously on the
TV screen.
5-2
ZTE Proprietary and Confidential