Receiving Dual Video - Zte ZXV10 T700 User Manual

3.4 Receiving Dual Video

If there is dual video in the conference, the receive end can adjust the display mode of
secondary video according to the number of local displays.
Only One TV (Display) at the Receive End
Receives secondary dual video through single-screen dual-display and single-screen
multiple-display.
multiple-display, refer to the descriptions in the video output setting. You can switch the
display mode to adjust the image on a TV screen.
The prerequisites for switching the display mode are described as follows:
l
Only after the terminal joins a conference, you can switch the display mode.
l
Switching display mode is valid only for video output port 1.
The switching method is described as follows:
1. After the terminal joins the conference, press the display mode switching key on the
remote control or click Change Display Mode on the Web page. Then, the remote
active video is displayed on the screen.
2. Repeat step 1.
picture-in-picture modes are switched in turn.
3. If the displayed result meets the requirement, stop pressing the display mode switching
key on the remote control or stop clicking Change Display Mode on the Web page.
Two TV Sets (Displays) at the Receive End
Make one TV display the remote image and the other display the secondary image. For
details, refer to the descriptions of output ports and displays.
SJ-20100910163147-001|2010-11-23(R1.1)
For details of the single-screen dual-display and single-screen
Then, the remote image, local image, splitting screen and
3-3
Chapter 3 Dual Video Operations
ZTE Proprietary and Confidential