ZXV10 T700 (V1.1.4)
Quick Start Guide
Serial No. SJ-20140210102035-001
ZTE USA Inc.
2425 N Central Expressway, Suite 600,
Richardson TX. 75080
Technical Support Website:
http://enterprise.zte.com.cn/us/
Email: enterprisesupport@zteusa.com
背板介绍
1
Equipment Connection
1.1
ZXV10 T700 Backplane Interfaces
SD video
output interface
Not used
10
9
8
7
6
5
4
7
1
Power input interface: connects a 12 V DC power source.
2
D-MIC: connects to the ZXV10 A100 digital microphone.
3
LAN: connects to an ethernet.
4
HDMI IN: video input interface; connects to a secondary video source, for example, an HD
camera or a DVD player.
5
VGA IN: video input interface; connects to a secondary video source, for example, a
computer.
6
HDMI OUT: video output interface; connects to a monitor, for example, an HD TV set.
7
VGA OUT: video output interface; connects to a monitor, for example, a projector.
USB: not used.
8
9
AUDIO OUT/IN: audio output/input interface; connects to the linear media devices.
10
MIC: connects to an analog-signal microphone.
Note:
Interfaces
1
,
2
,
3
,
5
, and
6
are typical and recommended interfaces. You can also
select other interfaces as needed.
indicates an input interface and
indicates an output interface.
1.2
Connecting Typical Devices
Network
Monitor
interface
1
To launch a simple conference without sending the secondary video stream, you
only need to connect the power cables, IP network, microphone, and monitor.
1.3
If the secondary video stream from a computer needs to be transmitted during a
conference, refer to the figure below for cable connections. The secondary video is
transmitted to the ZXV10 T700 terminal through cable
SD video
input interface
displayed on a monitor through cable
Power switch
C
cable
.
3
2 1
Computer
Projector
Monitor
1.4
If the secondary video stream from an HD camera or HD DVD player needs to be
transmitted during a conference, refer to the figure below for cable connections.
Select either
monitor through cable
Monitor
Projector
HD camera
HD DVD player
Digital
microphone
Power socket
Connecting a Computer as the Secondary Video
Source
A
, and the video is
B
or displayed by using a projector through
A
C
B
Connecting an HD Camera or DVD Player as the
Secondary Video Source
A
or
B
as the connection cable. The video is displayed on a
D
or displayed by using a projector through cable
D
C
B
A
2
Power socket
Digital microphone
Network interface
C
.
Power socket
Digital microphone
Network interface
Need help?
Do you have a question about the ZXV10 T700 and is the answer not in the manual?
Questions and answers