Configuring The Sip Conference Cloud Service - Zte ZXV10 ET312 User Manual

ZXV10 ET312 User Guide
Result
After the network is successfully connected, the home page displays the following
information:
l
On the home page, the
indicates that the current network is successfully connected.
l
On the home page, the following terminal configuration information is displayed at the
upper left corner:
IP address (for example, 10.10.10.1): The terminal is properly connected to a
à
network. However, the terminal name is not configured.
Terminal name/IP address (for example, industry park 16–01/10.10.10.1): The
à
terminal is properly connected to a network. The terminal name is configured.

4.1.3 Configuring the SIP Conference Cloud Service

This procedure describes how to use the
to hold a conference between two parties or among multiple parties.
Prerequisite
l
The terminal is not engaged in a conference.
l
The network is properly connected.
Context
You can use the
SIP server. After registration, you can use the user name to initiate SIP calls.
Steps
1. Press the Back key on the remote control to display the home page.
2. From the home page, select
configuration window is displayed, see
SJ-20190419092037-001|2019-04-08 (R1.0)
icon is displayed at the upper right corner. This
SIP cloud service configuration function to register a user name on the
4-6
SIP conference cloud service of the ZXV10 ET312
> Cloud Service.
Figure 4-5.
ZTE Proprietary and Confidential
The SIP cloud service