Operating Screen Display; Adjusting Display Mode - Zte ZXV10 T700 User Manual

• Log in to the Web page and choose System Control > Video Control. The Video
Control page is displayed.
l
Follow the instructions on the page to adjust the camera parameters, including
zoom, focus, aperture, brightness, contrast, and saturation.
l
Use the direction keys to adjust the camera to the required position.
• Do as follows to adjust camera parameters on the PC console:
l
Press the Focus key to adjust the focus of the camera.
l
Use the direction keys to adjust the camera to the required position.
l
Click Image Parameters. On the Image Parameters Setting page, set the
parameters as required.

2.2 Operating Screen Display

2.2.1 Adjusting Display Mode

Prerequisites
l
The ZXV10 T700 terminal can switch the display mode after joining a conference.
l
Switching display mode is valid only for video output port 1 (port connected to the
main TV). Other output ports do not support this function.
Context
To adjust the number of pictures displayed on the TV, do as follows:
Alternatively, you can log in to the PC console and continuously click Layout to switch the
picture displayed.
Steps
1. After a terminal joins a conference, press the Layout key on the remote control. Then,
the active video displays the remote picture.
2. Repeat step 1.
picture-in-picture modes are switched in turn.
3. If the display mode meets the requirement, release the Layout key to complete
switching.
– End of Steps –
SJ-20100910163147-001|2010-11-23(R1.1)
NoteThe horizontal turn angle of the camera is 180°.
Then, the remote picture, local picture, splitting screen and
Chapter 2 Common Operations
2-3
ZTE Proprietary and Confidential