Enabling Remote End To Control Local Camera; Enabling Dual Video - Zte ZXV10 T700 User Manual

ZXV10 T700 Operation Guide
Answering Mode
Auto
Manual
No Disturbance
3. Save the settings and exit.
– End of Steps –

5.2.2 Enabling Remote End to Control Local Camera

Context
You can determine whether to allow the remote end to control the local camera. The
following describes how to enable this function by using the remote control. Alternatively,
you can log in to the Web page and click Config Interface next to a video source after
choosing System Settings > Video > Video In. On the page that is displayed, enable the
function of remote control.
Steps
1. Choose Management > System > Video > Video Out by using the remote control.
The Video Out page is displayed.
2. Click Edit next to the required video source. The Edit dialog box is displayed.
3. Select the Remote Control check box.
4. Save the settings and exit.
– End of Steps –

5.2.3 Enabling Dual Video

Context
Only a terminal enables the function of dual video, the terminal can transmit dual video to
a conference.
Steps
1. Choose Management > General > Call Option by using the remote control or after
logging in to the Web page. The Call Option page is displayed.
SJ-20100910163147-001|2010-11-23(R1.1)
Application
When a call is received, the ZXV10 T700 terminal automatically answers
the call and connects to the conference.
When a call is received, the ZXV10 T700 terminal displays a call prompt
asking you whether to accept the call.
When a call is received, the ZXV10 T700 terminal directly rejects the call.
In this case, the TV screen at the remote end prompts that the remote end
is busy.
5-4
ZTE Proprietary and Confidential