Selecting Main Video Source; Selecting Secondary Video Source - Zte ZXV10 T700 User Manual

Context
To activate a preset position, the TV screen displays all the video sources already
configured with preset positions of the ZXV10 T700 terminal.
The following describes how to activate a preset position by using the remote control.
Alternatively, you can log in to the Web page and preset a camera by choosing
Management Control > Video Control or log in to the PC console and activate a preset
position by clicking Get Camera Position.
Steps
1. In the active video, press the Camera key on the remote control and choose Activate
to display the corresponding page.
2. Select a preset position and click the OK key on the remote control. In this way, the
preset position is successfully activate.
– End of Steps –

4.4 Selecting Main Video Source

Prerequisites
This option is displayed only after a video source is selected in video output settings.
Context
The main video source refers to the picture displayed on the main TV screen. The following
describes how to select the main video source by using the remote control. Alternatively,
you can log in to the Web page and click Main Video after choosing System Control >
Video Control or log in to the PC console and click Switch video source.
Steps
1. In the active video, press the Camera key on the remote control. The Set Video
Source page is displayed.
2. Move the cursor to select the Main option. The Select Main Video page is displayed.
3. Select a video source as the main video source and click the OK key on the remote
control. In this way, the video source switching is successful.
– End of Steps –

4.5 Selecting Secondary Video Source

Prerequisites
This option is displayed only after a video source is selected in video output settings.
SJ-20100910163147-001|2010-11-23(R1.1)
Chapter 4 Video Source Settings
4-3
ZTE Proprietary and Confidential