Chapter 4
Video Source Settings
Table of Contents
Setting Video Source in GUI.......................................................................................4-1
Presetting Camera .....................................................................................................4-2
Activating Preset Position...........................................................................................4-2
Selecting Main Video Source......................................................................................4-3
Selecting Secondary Video Source ............................................................................4-3
4.1 Setting Video Source in GUI
In the active video, press the Camera key on the remote control. The video source setting
interface is displayed. The interface provides four functions, namely Activate, Preset,
Main, and Second.
Activate and Preset
After the angle of the camera is preset, for example, enable the lens to face the whole
conference site, you can directly switch to the angle next time. This facilitates quick
positioning.
Main and Second
You can switch the video source to display the pictures of the main video source
and secondary video source on a same TV screen but cannot display their pictures
simultaneously.
This option is displayed only after an interface is selected in video input settings. For
example, if you select the HDMI option in video input settings, the page is as shown in the
following figure. After you save the settings, the system displays the name and icon of the
HDMI option.
Figure 4-1 Selecting Video Port
4-1
SJ-20100910163147-001|2010-11-23(R1.1)
ZTE Proprietary and Confidential