Adjusting Camera Parameters - Zte ZXV10 T700 User Manual

ZXV10 T700 Operation Guide
descriptions in the ZXMS80 V2.03 Multimedia Service Management System Quick
User Guide .
l
For point-to-point conferences, the terminals can remotely control over each other.
l
The terminals to be controlled enable the function of remote control. The detailed
setting method is as follows: Choose Management > System Settings > Video
> Video In by using the remote control. Alternatively, log in to the Web page and
choose System Settings > Video > Video In. Then, click Config interface next to
the required video source and enable the function of remote control.
Context
After a conference is started, you can perform operations to control a remote camera, for
example, control its rotation or adjust its focus.
Steps
1. In an active video, press the far/near switching key
When the TV screen displays the icon
control the remote camera.
2. Press the direction keys
the focus control key to adjust the focus of the picture.
3. Repeat step 2 until the TV screen displays a proper picture.
– End of Steps –

2.1.3 Adjusting Camera Parameters

Context
According to requirements, you can adjust the camera parameters, including focus,
brightness, contrast, and saturation.
Steps
• Do as follows to adjust camera parameters by using the remote control:
l
Press the
l Use the direction keys to adjust the camera to the required position.
SJ-20100910163147-001|2010-11-23(R1.1)
on the remote control to move the picture or press
key to adjust the focus of the camera.
2-2
on the remote control.
, release the key. In this case, you can
ZTE Proprietary and Confidential