Zte ZXV10 T700 User Manual page 12

ZXV10 T700 Operation Guide
Symbol Input Method
The operation procedure for inputting the symbol is described as follows:
1. In the text input mode, press the input method switching button to switch to the ".
;(symbol)" mode, as shown in the figure below.
Figure 1-3 Inputting Symbols
2. In the interface as shown in the above figure, press the down button to turn to the next
page to find the symbol , as shown in the figure below.
Figure 1-4 Displaying Symbols
3. In the interface as shown in the above figure, move the cursor to the symbol and press
the OK button to input the symbol .
Number Input Method
In the text input mode, press the button
Input the separator "." in IP address
In the IP address input mode, press the symbol button to input the separator ".".
Delete
In the text input mode, press the DEL button to delete a character before the current cursor
in the text box.
SJ-20100910163147-001|2010-11-23(R1.1)
1-6
ZTE Proprietary and Confidential
to input numbers.