Video Output Settings - Zte ZXV10 T700 User Manual

Item
Remote Control
Camera Orientation
Turn Speed
6. Save the settings and exit.
– End of Steps –

2.4.3 Video Output Settings

Context
Usually, you can use the default video output settings. To modify the output source and
port, do as follows:
The following describes how to set video output by using the remote control. Alternatively,
you can log in to the Web page and set video output by choosing System Settings >
Video > Video Out.
Steps
1. Choose Management > System Settings > Video > Video Out by using the remote
control. The Video Out interface is displayed, as shown in the following figure.
Figure 2-4 Setting Video Output
2. According to requirements, select a port and click Config next to the port. The
following interface is displayed.
SJ-20100910163147-001|2010-11-23(R1.1)
Description
Specifies whether to enable the function of remote control. That is, the
ZXV10 T700 camera can be remotely controlled by other terminals
(often the chairman terminal) with the function of remote control
The options are Normal and Reverse
Set this parameter according to requirements
The options are Normal, Quick, and Slow
Set this parameter according to requirements
2-9
Chapter 2 Common Operations
ZTE Proprietary and Confidential