Video Input Settings - Zte ZXV10 T700 User Manual

ZXV10 T700 Operation Guide
Steps
1. In the active video (without GUI), press the Camera key on the remote control. The
switching bar for video source is displayed.
2. Select the main video source or the secondary video source as required, and press
the OK key on the remote control.
– End of Steps –

2.4.2 Video Input Settings

Context
Usually, you can use the default video input settings. To modify the input source and port,
do as follows:
The following describes how to set video input by using the remote control. Alternatively,
you can log in to the Web page and set video input by choosing System Settings > Video
> Video In.
Steps
1. Choose Management > System Settings > Video > Video In by using the remote
control. The Video In interface is displayed, as shown in the following figure.
Figure 2-1 Setting Video Input
2. Refer to the following table to name each video source and configure information, such
as port.
Item
Inner Camera
SJ-20100910163147-001|2010-11-23(R1.1)
Configuration Method
Name the inner camera. Such a name must be simple and easy to
remember. It can consist of letters in upper cases, lower cases,
digits or Chinese
For example, Camera is the name of inner camera input
2-6
ZTE Proprietary and Confidential