Adjusting Input Volume; Operating Video; Switching Video Source - Zte ZXV10 T700 User Manual

Steps
• Press the volume control keys on the remote control to adjust the output volume. Press
+ to turn up the output volume and - to turn down the output volume.
• Log in to the Web page and choose System Control > Video Control. The Video
Control page is displayed.
l
Click Speak Off to disable the local speaker. In this case, Speak Off changes to
Speak On. Click Speak On to enable the local speaker.
l
Click
volume. Meanwhile, the digit in the middle shows the current output volume.

2.3.2 Adjusting Input Volume

Context
This operation helps to adjust the input volume of the local end according to the volume
of the remote end.
Steps
1. Choose Management > System Settings > Audio > Mic/Line Input by using the
remote control. Alternatively, you can log in to the Web page and choose System
Settings > Audio. The Mic/Line page is displayed.
2. Select the left channel or right channel as required. Then, enter the volume in the
Input Gain text box. The maximum value is 16 and minimum value is 0.
3. To mask the local input volume, press
local microphone.
– End of Steps –

2.4 Operating Video

2.4.1 Switching Video Source

Context
This operation helps to implement switching between the main video source and the
secondary video source. Through the switching operation, you can view the pictures of
the main video source and the secondary video source on a same TV.
SJ-20100910163147-001|2010-11-23(R1.1)
to turn up the output volume; click
2-5
Chapter 2 Common Operations
to adjust the output volume. To be specific, click
on the remote control to disable the
ZTE Proprietary and Confidential
to turn down the output