Example
V1.0.0.2 2010-08-07 indicates that the current system version is V1.0.0.2 and the release
date is Aug 7, 2010.
6.3 Performing Ping Test
Prerequisites
The ZXV10 T700 terminal is already connected to the network and the network status is
normal.
Context
The ping test aims to test whether the IP network between the ZXV10 T700 terminal and
other devices including MCUs, PCs, and videoconferencing terminals.
Steps
1. Choose Management > Diagnosis > Ping Test by using the remote control.
Alternatively, you can log in to the Web page of the terminal and choose System
Diagnose > Ping Test. The Ping Test page is displayed.
2. In the Remote Address text box, enter the IP address of the remote device.
3. Click Ping to start the ping test.
4. After the ping test is complete, the result is as follows:
l
If the remote device is reachable, the page displays the traffic transmitted to and
received from the remote device.
l
If the remote device is unreachable, the page displays only the traffic transmitted
to the remote device. The traffic received from the remote device is 0.
– End of Steps –
6.4 Status Icon
Table 6-1
Table 6-1 Description of Status Icons in PC Console
No.
Icon
1
2
SJ-20100910163147-001|2010-11-23(R1.1)
describes the status icons of the PC console.
Description
Alarm status icon
When an alarm is reported, click this icon to pop up the alarm
information dialog box.
Status icon of WAN network
indicates that the connection of the network cable to the WAN port is
abnormal.
indicates that the WAN network connection is normal.
6-3
Chapter 6 Other Operations
ZTE Proprietary and Confidential