Timing Chain And Primary Drive Assembly - Husqvarna TC 250 2010 Workshop Manual

ENGINE REASSEMBLY

Timing chain and primary drive assembly

Install the timing chain slider (1), tighten the screw (2) using a 5 mm wrench (10
Nm, 0.1 Kgm, 7.3 ft/lb, Loctite 243) and make sure the slider moves freely.
Fit the oil pump drive gear (3) making sure the side with the dot is facing out-
side.
Fit the primary drive double gear (4) making sure to line up the timing dot (A)
with the shaft dot (B).
H.34 Part. N. 8000 H1489 (10-2009)