Supply Hose Check (Tc); Supply Hose Check (Te - Txc) - Husqvarna TC 250 2010 Workshop Manual

SETTINGS AND ADJUSTMENTS

Supply hose check (TC)

Check the hose (1) for leaks and replace it as required.
Remove the supply hose as described in Section "E".
Supply hose check (TE – TXC)
Remove saddle and side panels as described in Section "E".
Remove the tank (1) retaining screw (2).
Lift the tank (2) and check the hose (3) running from the pump (4) to the throttle
body (5).
To replace the hose, squeeze the two retainer tabs (6) at one end of the hose
and detach hose. Repeat at the other end of the hose.
Part. N. 8000 H1489 (10-2009) D.33