Husqvarna TC 250 2010 Workshop Manual page 89

(TC)
- Slacken the clamps (2) and (3) securing the carburettor to the intake coupling
and to the hose coupling on the air box. Pull the carburettor rearwards to
release it from the intake coupling and extract it from the right-hand side of
the motorcycle.
(TE – TXC)
- Disconnect the connectors (4 ) and (5) from the throttle body (6).
- Loosen the clamps (7) and (8).
- Push the intake coupling (9) towards the rear end of the motorcycle to re-
lease the throttle body (6) and then extract it from the right-hand side of the
motorcycle.
- Place a vessel on the left-hand side of the cylinder, under the engine.
- Slacken the radiator cap (10).
Part. N. 8000 H1489 (10-2009)
GENERAL PROCEDURES
E.23
4
5
6
7
9
8
H00665