Oil Pump - Husqvarna TC 250 2010 Workshop Manual

Hide thumbs Also See for TC 250 2010:
Table of Contents

Advertisement

Oil pump

Loosen the screws (1) using a 4 mm Allen wrench and remove pump body (2)
and gasket.
Remove the pump rotors (3) and (4), and extract the drive pin (5) to release
the gear (6).
Check gear (6) and rotors (4) for wear. Replace if worn.
Smear the rotors with oil and make sure to align the rotor dots (9)
on assembly. Use a new gasket.
Part. N. 8000 H1489 (10-2009)
ENGINE OVERHAUL
G.19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tc 250 2009Txc 250 2010

Table of Contents