Saddle Removal; Side Panel Removal - Husqvarna TC 250 2010 Workshop Manual

GENERAL PROCEDURES

Saddle removal

- Turn the rear fixing (1) counter clockwise and remove the saddle.

Side panel removal

- Remove the saddle as described in the relevant paragraph.
- Loosen the retaining screws (1) and remove the side panels (2) and (3).
Battery removal (TE - TCX)
- Remove the saddle as described in the relevant paragraph.
- First remove the BLACK negative cable (8 mm Allen wrench), then the RED
positive cable (when reassembling, first connect the RED positive cable, then
the BLACK negative cable); remove the battery (1) from its housing.
E.4 Part. N. 8000 H1489 (10-2009)