Husqvarna TC 250 2010 Workshop Manual page 8

IMPORTANT NOTICES
1) TC and TXC models are RACING motorcycles and are warranted to be free
from operating defects; a scheduled maintenance chart for racing use is provided
in Section B.
2) The TE model is for ROAD USE (DERATED); it is warranted to free from
defects and covered by legal warranty, provided that the STANDARD CON-
FIGURATION IS MAINTAINED and the maintenance chart provided in Section
B is observed. For TE models modified to RACING SPECIFICATIONS (FULL
POWER RATING), observe the scheduled maintenance chart for racing use
provided in Section B.
* This motorcycle has not been designed to travel over long distances with the
engine at top rpm, as in long-distance road or highway travel. Riding over long
distances at full throttle may result in severe engine damage.
* The geometry and setup of this motorcycle have been designed for racing
and to provide top performance when riding solo. We advise against riding
two-up, whether off-road or on the track.
* ALWAYS remember that these motorcycles are specifically designed for
racing, i.e. for usage conditions significantly different from those experienced
in regular road use.
IMPORTANT
VEHICLE CONFIGURATION as outlined below is a prerequisite for the war-
ranty to remain valid:
A) STANDARD MOTORCYCLE, FOR ROAD USE: DERATED;
B) RACING MOTORCYCLE, FOR RACING USE: FULL POWER RATING.
* In order to maintain the vehicle's "Guarantee of Functionality", the client must
follow the maintenance programme indicated in Section B by having the required
maintenance inspections carried out at authorised HUSQVARNA dealers. The
cost for changing parts and for the labour necessary in order to comply with
the maintenance plan is charged to the Client. The warranty becomes NULL
AND VOID if the motorcycle is rented.
Notes
Left and right side is determined when seated on motorcycle.
Z: number of teeth
A: Austria
AUS: Australia
B: Belgium
BR: Brazil
CDN: Canada
CH: Switzerland
D: Germany
E: Spain
F: France
FIN: Finland
GB: Great Britain
I: Italy
J: Japan
USA: United States of America
Unless otherwise specified, data and instructions apply to all market variants.
b.2 Part. N. 8000 H1489 (10-2009)