Front Fork Removal - Husqvarna TC 250 2010 Workshop Manual

FRONT SUSPENSION

Front fork removal

Measure height "A" (it will need to be restored to original value on assembly). Set
a block under the engine and see that the front wheel is lifted from the ground
and then proceed as follows:
- remove the screws (1) and the brake line clamp on the left-hand side;
- remove the six screws (2) and the fork leg guards;
- remove the brake calliper from the L.H. fork leg loosening the two retaining
screws (3);
- remove the front wheel as described in Section "Y";
I.4
Part. N. 8000 H1489 (10-2009)